Let’s cut to the chase. Wood fence installation prices in Dickinson, TX run $28 to $36 per linear foot for most standard jobs. That’s the reality. Here’s the catch: that number means nothing without context.
Wood fence prices typically run $26 to $30 per foot for regular fence setups. But here’s where it gets messy. That price depends on your fence configuration. Cedar costs more than pressure-treated pine. Want 2 rails? Different price. Need 3 rails? Higher cost. Rot board? Extra. Trim and cap? More money.
Here’s what we’re actually looking at for pricing:
Basic Installation: $28 per linear foot for 150 feet = $4,200 Higher-End Setup: $36 per linear foot for 150 feet = $5,400
And if you need tear down and haul off? That’s another $2 to $3 per linear foot. So for 150 feet of old fence removal, you’re looking at $300 to $450 just for that part.
Wood fence installation prices in Dickinson matter because most homeowners have no clue what they’re getting into. They see “$28 per foot” and think they’ve got it figured out. Wrong.
That base price assumes standard 6-foot pickets. Want 7-foot or taller? Additional cost. Need that 2×12 treated bottom board instead of the standard 2×6? More money. Trim and cap to make it look finished? That’s extra too.
The rails are 2x4s that go across each panel. Standard. The pickets are 5/8″ thick, either 5.5″ or 6″ wide. Pressure-treated posts are what we use unless you specify otherwise. Bottom board is typically a 2×6 treated rot board.
Best time? Not summer. Everyone wants their fence then, prices rise, and schedules fill up. Spring or fall offers better availability and often better pricing.
What really matters is timing. Do it before you need it. Don’t wait until your neighbor’s dog treats your yard like a bathroom. Don’t wait for an HOA letter about your property line.
The process isn’t rocket science, but it’s not simple either. We dig post holes. Set posts with concrete. Let that cure. Install rails. Attach pickets. Install gates if needed.
Sounds easy? It’s not. Post spacing matters. If you’re off by even a little bit, your gate won’t hang right. Ground isn’t level? Now you’re dealing with stepped panels or custom cuts. Hit a utility line because you didn’t call 811? Now you’re looking at delays and potential fines.
First mistake: shopping on price alone. Cheapest bid usually means cheapest materials or fastest installation. Neither works out well.
Second mistake: not asking about the specifics. What kind of posts? How deep do they go? What grade of lumber? Are the pickets actually the width they claim?
Third mistake: DIY. Look, I get it. Save some money, right? But most homeowners end up calling us anyway after they realize their “straight” fence line looks like a snake and their gates don’t close properly.
Fourth mistake: not planning for extras. Almost every job has extras. Tree root in the way? Extra cost to cut it. Sprinkler line needs moving? Extra cost. Want to change the height halfway through? Extra cost.
Bad installation shows immediately. Posts that aren’t plumb. Gates that drag or won’t latch. Pickets with gaps that look amateur.
But the real problems show up later. Posts start leaning because they weren’t set deep enough or the concrete didn’t cure properly. Wood starts rotting because there’s no proper drainage or ventilation. Gates sag because the frame wasn’t built to handle the weight.
Then you’re looking at repairs or complete replacement. And guess what? That costs more than doing it right the first time.
Cedar looks better. Smells better. Naturally resists insects and decay. Costs more upfront but lasts longer with proper maintenance.
Pressure-treated (pine) costs less upfront. Needs staining or sealing to look decent and last. But it’s strong, and when maintained properly, it gives you good value.
Most customers in Dickinson go with pressure-treated because of the price difference. Nothing wrong with that choice if you understand what you’re getting.
Wood frame gates work fine if built properly. Metal frame gates are stronger and typically last longer, especially on wider openings.
Most residential gates are fine with wood frames. But if you’ve got kids constantly swinging on the gate or you’re opening it constantly for lawn equipment, metal frame makes sense.
We offer labor-only pricing if you want to buy your own materials. Some customers save money this way, especially if they can get contractor pricing at Home Depot or Lowe’s.
Just understand: if the materials are wrong or defective, that responsibility is yours. We will install what you provide, but we cannot warranty materials we did not supply.
How many linear feet do you need? Measure it. Don’t guess.
What height fence do you want? 6-foot is standard for privacy. 4-foot for decoration or to contain small dogs.
Cedar or pressure-treated? Budget usually decides this.
Any gates needed? How wide? Single or double gate?
Any obstacles? Trees, utility boxes, slopes, existing structures?
Current pricing runs $28 to $36 per linear foot for standard installation. That’s subject to change without notice, so check with our estimator for current wood fence installation prices.
Add tear down and haul off if needed. Add extras for tall pickets, upgraded rot boards, trim and cap.
Want a free estimate? Call 832-688-4412. We’ll ask the right questions, measure properly, and give you a real number you can work with.
Don’t shop on price alone. Don’t go with the lowest bid unless you understand exactly what you’re getting. And don’t assume every fence company builds the same way or uses the same materials.
Good wood fence installation isn’t cheap. But bad wood fence installation costs more in the long run.
When you’re looking for an estimate on your new wood fence, remember that our expert team serves a wide region. While our home base is in League City, our professional wood fence installation services are available to residents throughout the Southeast Houston area.
We’re proud to provide free estimates and quality work in these communities:
We also serve all surrounding areas within the following zip codes: 77511, 77510, 77518, 77573, 77546, 77550, 77551, 77553, 77554, 77568, 77539, 77581, 77584, 77586, 77590, 77591, 77592, 77058, 77059, 77062, 77089, 77034, 77075, and 77047.
Q: What types of wood do you use for fencing in Houston’s climate?
A: We primarily use pressure-treated pine and cedar due to their natural resistance to humidity, insects, and rot, which are essential for durability in the Houston area.
Q: How long does a typical wood fence installation take?
A: For most standard residential projects, the installation process is typically completed within 1 to 3 days, depending on the scope of the project and weather conditions.
Q: Do I need a permit to install a wood fence in Houston?
A: Yes, most municipalities within the Greater Houston area require a permit for fence installation. We handle the entire permit application and acquisition process for our clients.
Q: How do you handle post-installation care and maintenance?
A: We recommend a regular maintenance schedule that includes cleaning and applying a sealant or stain every 2-3 years to protect the wood from the elements and extend its lifespan. We provide detailed care instructions after installation.
Monday: 8 AM–5 PM
Tuesday: 8 AM–5 PM
Wednesday: 8 AM–5 PM
Thursday: 8 AM–5 PM
Friday: 8 AM–5 PM
Saturday: 9 AM–1 PM
Sunday: Closed